One thing’s for sure, all the insulation on the roof will have to come out and we will have to probe the timbers to find out their moisture content before we can even think of re-roofing. We have our suspicions that not only was the vapour barrier not installed correctly on this roof, but the roof was also leaking in places. I will post more videos as the job progresses.
This roof is leaking or sweating, so we’ve been asked to make some inspection holes to see if we can determine the cause of the problem. We first noted that the falls on the roof are incorrect and inadequate, as water is puddling. For a 4 year old building, this is not a good sign. One of the things that kills a flat roof is incorrect falls, and that is the case here.
This flat roof is covered with a single ply roofing material and at the moment we don’t know if the roof is leaking or there is a problem with the vapour control barrier, we have to make holes all over the roof to assess the situation before our surveyors can work out what the exact problem may be.
Replacement of an old flat asphalt roof using insulation covered with EPDM, a skylight and a new insulated tank box. We had to have a tin roof over the roof for this project, because we knew the roof would be open for longer than a day. The new flat roof will be insulted to the new building regulations. New flat roofs today have to be insulated to a very high standard today.
This new flat roof is being laid using Kingspan’s ‘cut to falls’ insulation, then covered using EPDM rubber, single ply as the waterproofing membrane. This roof will carry a 20 year insurance-backed guarantee. New roofs today need to be insulated to a very high standard and the depth of insulation on this roof is very good.
Single ply flat roof covering rubber EPDM not firestone, over torch on mineral felt, asphalt, 80mm Kingspan insulation glued to decking, new flashings box gutter, scaffolding, no lead, 20 year guarantee. Part L of Building Control was not applicable.